QuickScan reader

pin6QuickScan reader

The QuickScan reader series is Datalogic Scanning’s value line of general purpose handheld data collection products. As an entry level scanner, the QuickScan L scanner provides a simple solution for those who prefer laser scanning technology and need to read bar codes at nominal distances. A wider than usual scan angle provides the ability to read a longer bar code from a shorter distance.

Perfect for use in retail and office environments, its small, lightweight and ergonomic design is comfortable to use during daily operations. The QuickScan L reader has snappy reading performance and is capable of reading a wide range of symbologies including the majority of 1D codes plus GS1 DataBar™ linear codes. 




  • Wider scan angle for longer code reading
  • User replaceable scan window
  • Multi-interface solution for the most popular interfaces
  • Supports GS1 DataBar™ linear codes
  • Water and Particulate Sealing Rating: IP42
  • Drop resistance to 1.5 m / 4.9 ft
  • 20 kV Electrostatic protection (air discharge)

Decoding Capability
1D / Linear Codes Autodiscriminates all standard 1D codes including GS1 DataBar™ linear codes
Postal Codes China Post

Current Operating (Typical): 100 mA @ 5 VDC
Standby/Idle (Typical)
: < 35 mA
Input Voltage 5 VDC +/- 10%

Ambient Light 64,575 lux
Drop Resistance Withstands repeated drops from 1.5 m / 5.0 ft onto a concrete surface
ESD Protection (Air Discharge) 20 kV
Humidity (Non-Condensing) 5-95%
Particulate and Water Sealing IP42
Temperature Operating: 0 to 55 °C / 32 to 122 °F
Storage/Transport: -40 to 70 °C / -40 to 158 °F

Weight 127.6 g / 4.5 oz
Colors Available Black; White
Dimensions 17.0 x 7.1 x 6.6 cm / 6.7 x 2.8 x 2.6 in

Reading Performance
Light Source 650 nm VLD
Print Contrast Ratio (Minimum) 30%
Reading Angle Pitch: +/- 65°; Roll (Tilt): +/- 30°; Skew (Yaw): +/- 60°
Reading Indicators Beeper (Adjustable Tone); Good Read LED
Resolution (Maximum) 0.130 mm / 5 mils
Read Rate (Maximum) 100 reads/sec.